Note: This is only a general guide for KMS with Provisioning Services. This does not imply that the previously mentioned operating systems and Offices are supported in all versions of Provisioning Services. Refer to the Provisioning Services requirements for the operating system and Office supported in the latest version of Provisioning Services.

In PVS, the option for KMS is configured while building vDisks using the Imaging Wizard. Alternatively, it can be configured at any time using the Console or MCLI/PowerShell command line interfaces. Refer to the PVS documentation for more information about managing Microsoft KMS volume licensing. Note: Information in this article applies only to specified Windows OS and Office versions.

KMS Configuration Scenarios

The following section outlines the steps to configure KMS in various scenarios to accommodate specific deployment environments. Read all the scenarios to verify which one best fits your deployment and follow the procedures accordingly.

https://djgol.netlify.app/flex-3-apk-download-for-android.html. Notes:

• Citrix recommends that administrators complete all the steps in the proper order for a successful configuration.
• The SOAP/Stream Service account must be a member of a local administrator group in PVS Servers.

• both Windows and Office
• only Windows
• only Office

• Office 2010 – Office14
• Office 2013 – Office15
• Office 2015 – Offcie16

• 32-bit Office in 64-bit operating system, %ProgramFiles% is Program Files (x86).
• Office and operating system are both 32-bit or 64-bit, %ProgramFiles% is Program Files.

Note – If the selected version of Provisioning Services supports versioning, the vDisk's private mode and maintenance version can be used interchangeably. If a maintenance version is used, promote the maintenance version to production or test version; set vDisk access mode from Private to Standard.

Download free 150 best NES game rom in 1 pack (17.1MB) Share this games: Label: Action, Adventure, Board, Fighting, Mario, NES Games, Puzzle, Racing, Shooting, Strategy, Under 50MB + Comments + 6 Comments Reply. Tuesday, April 10, 2018 Where is the download link? Unknown Tuesday, September 04, 2018. Download NES Game Pack - 749 ROMS TKRG torrent.Bit Torrent Scene ( BTScene ) a public file sharing platform. Topics NES, Games, Console, Licensed, Unlicensed, bootleg, pirate, hacks This is believed to be the definitive collection of NES roms. Download Exo Ladder Season 2 Sub Indo Drakorindo Nes Game Pack Download Mongolian Encoding Converter 1.0 Parametric Eq 2 Free Download Tekla Structures Xsteel V13 2 Crack Serial Canon Ir3300 Hdd Software Management Kany Garcia Cualquier Dia Download For Mac Sketchup Pro 2015 For Mac Download Whatsapp For Nokia Asha 310. Nes game pack download.

Use the following scenarios to configure KMS accordingly:

Scenario 1: Configuring KMS for the first time for a pre-existing vDisk

Assumptions

A vDisk was pre-built using a tool like XenConvert or the Imaging wizard (with Microsoft Licensing Option set to None):

All Office 365 Users: Repair an Office Installation from the Control PanelRELATED:Whether you’re using Office 365 Home or Business, you can try to repair an Office 365 installation by re-running its Setup program from the Control Panel. Microsoft office 365 repair tool mac.

• For both Windows and Office: A vDisk that has an operating system and Office installed on it is pre-built using XenConvert/Imaging Wizard but KMS has never been configured.
• For only Windows or only Office: A vDisk that has the operating system installed on it (Optional: Office is included in the image); the image was pre-built using the XenConvert/Imaging wizard but KMS has never been configured.

Procedure

Note: It is important to perform this operation on a system started from the vDisk in Private Image mode so that the rearm count of the master target device hard disk is not reduced. Also, when the system is rearmed, it does not require rearming again.

1. Connect to the PVS Server; in the Console, right-click the vDisk and select Properties.
2. Click the Microsoft Volume Licensing tab and set the licensing option to None.
3. Start the device from the vDisk in Private Image mode.
4. Rearm the system for both Windows and Office, one after the other. If KMS is configured for only one of them, select your option to rearm accordingly:

• For Windows: Run cscript.exe slmgr.vbs -rearm
• For Office 2010, %ProgramFiles%Common Filesmicrosoft sharedOfficeSoftwareProtectionPlatformOSPPREARM.EXE
• For Office 2013 and 2016: %ProgramFiles%Microsoft Office%Office%OSPPREARM.EXE
  • ​Note: When rearming both Windows and Office be sure to rearm Office first.

1. A message appears requesting that you reboot the system. Do not reboot - instead, shut down the target device.
2. Connect to the PVS Server; in the Console, right-click the vDisk and select Properties.
3. Click the Microsoft Volume Licensing tab and set the licensing option to KMS.
4. On the Mode tab, set the vDisk Access Mode to Standard Image mode.
5. Stream the vDisk to one or more target devices.

• For Windows: Run cscript.exe slmgr.vbs –dlv
• For Office: Change the directory to %ProgramFiles%Microsoft Office%Office% and then run cscript ospp.vbs /dcmid

Scenario 2-A: Maintaining or upgrading a vDisk image that is currently using KMS

Assumptions

A vDisk is already configured for KMS and is deployed successfully.

• For both Windows and Office: A vDisk is already configured for KMS, both Windows and Office, and is deployed successfully.
• For Windows or Office: A vDisk is already configured for KMS 'Windows' or 'Office' and is deployed successfully.

Procedure

1. In the PVS Console, right-click the vDisk and select Properties.
2. On the General tab, set the vDisk Access Mode to Private Image mode.
3. Start the target device.
4. Apply the required operating system Application/Service Pack/Update.
5. Shut down the target device.
6. Connect to the PVS Server and in the Console, right-click the vDisk and select Properties.
7. On the General tab, set the vDisk Access Mode to Standard Image mode.
8. Stream the vDisk to one or more target devices.

Scenario 2-B: Maintaining or Upgrading a vDisk Image enabled with vDisk Versioning that is currently using KMS

Assumptions

CrossOver can't connect directly to hardware ports or devices on your computer. This can cause problems if the Windows program you're trying to use needs to communicate with a USB device. Crossover mac usb device.

A vDisk is already configured for KMS and is deployed successfully. The vDisk is enabled to use vDisk versioning, and as a result, it might already have versions associated with it.

• For both Windows and Office: A vDisk is already configured for KMS, both Windows and Office, and is deployed successfully.
• For Windows or Office: A vDisk is already configured for KMS, 'Windows' or 'Office', and is deployed successfully.

Procedure

1. In the PVS Console, right-click the vDisk, and select Versions.
2. Create a new disk version.
3. Access target device properties and set Type to Maintenance.
4. Start the Target device.
5. Access the target device machine and select Maintenance from the Boot menu when prompted.
6. Apply the required operating system Application/Service Pack/Update.
7. Shut down the target device.
8. Access the PVS Server Console, right-click the vDisk, and select Versions. Promote the vDisk from Maintenance to Production or Test.
9. Access the PVS Server Console. Under target device properties, change the Type to Production or Test.
10. Stream the vDisk with this version to one or more target devices.

Scenario 3: Installing Microsoft Office to an existing KMS configured for a Windows vDisk

Assumption

A vDisk is already KMS configured for Windows and is deployed successfully.

Procedure

1. In the PVS Console, right-click the vDisk and select Properties.
2. Click the Microsoft Volume Licensing tab and change the licensing option from KMS to None.
3. On the General tab, set the vDisk Access Mode to Private Image mode.
4. PXE boot to the vDisk in Private Image mode to rearm.
   Note: An OS rearm is required along with the Office rearm.

• For Windows: Run cscript.exe slmgr.vbs -rearm
• For Office 2010, %ProgramFiles%Common FilesMicrosoft SharedOfficeSoftwareProtectionPlatformOSPPREARM.EXE
• For Office 2013 and 2016: %ProgramFiles%Microsoft Office%Office%OSPPREARM.EXE

1. A message is displayed to reboot the system. Do not reboot - instead, shut down the target device.
2. In the Console, right-click the vDisk and select Properties.
3. Click the Microsoft Volume Licensing tab and change the license option from None to KMS.
4. On the General tab, set the vDisk Access Mode to Standard Image mode.
5. Stream the vDisk to one or more target devices.
   Note: Validate that the KMS configuration was successful by verifying that the CMID for each device is unique.

• For Windows: Run cscript.exe slmgr.vbs –dlv
• For Office: Change the directory to %ProgramFiles%Microsoft Office%Office% and then run:
  • cscript ospp.vbs /dcmid
  • cscript ospp.vbs /dstatus (The OS and Office discovery of KMS is independent from each other and /dstatus shows if office has located KMS on network.)
  • cscript ospp.vbs /act (To expedite Activation)
• ​Open Word and check the activation.
• NOTE- Re-launch any Office App twice to kick off the activation service
• Restart the service if you don't get the CMID status.
• Shutdown the target device; do not reboot.
• Connect to the Provisioning Services Server. In the Console, right-click on the vDisk and select Properties.
• On the General tab, set the vDisk Access Mode to Standard Image mode.
• Stream the vDisk to one or more target devices

Scenario 4: Upgrading Microsoft Office on an existing KMS configured (for Windows) vDisk.

Assumption

A vDisk is already KMS configured for Windows and Microsoft Office.

Procedure

1. In the Provisioning Services Console, right-click on the vDisk and select Properties.
2. On the General tab, set the vDisk Access Mode to Private Image mode.
3. Start the target device.
4. Run the new Microsoft Office setup and choose to perform an upgrade.
5. Reboot the target as required by the installation.
6. Shut down the target device.
7. Connect to the Provisioning Services Server. In the Console, right-click on the vDisk and select Properties.
8. On the General tab, set the vDisk Access Mode to Standard Image mode.
9. Stream the vDisk to one or more target devices.
   

Important Information on Rearm

• Microsoft restricts the number of rearms possible on installed operating systems and Office products.
• With Windows and Office products utilizing KMS activation, the available rearm count will increment from 0 to 1 on a successful activation against a KMS host server.
• If you run out of rearms, activating by using a KMS host lets you rearm once. This ensures that once administrators can activate a KMS client, they will be able to issue a rearm. For example, a KMS client with a rearm count of 1 issues a rearm using the remaining single rearm, and reboot. Upon reboot after the KMS client activates, the rearm count will return to a count of 1.
• In all of the preceding scenarios, a successful KMS configuration for a Provisioning Services vDisk, does not require you to rearm the vDisk except the first time when it is configured.

Additional Resources

Summary

This article describes how to activate your copy of Windows Vista. Activation helps verify that your copy of Windows is genuine and that it has not been used on more computers than the Microsoft Software License Terms allow. Activation also helps prevent software counterfeiting.
In order to continue using all the features in Windows Vista, activation is required. When you start Windows Vista the first time, you have 30 days to activate it online or by telephone. If the activation period expires before you complete the activation, many features of Windows Vista will be disabled. To regain full use of Windows Vista, you must activate it.

Note While activation for Windows Vista is still available through the online and automated phone system methods, assisted support for Windows Vista is no longer available. This includes assisted support for activation issues.

More Information

What you will need

You must be logged on to Windows as an administrator to activate Windows Vista.

To activate your copy of Windows Vista, you may need your valid product key. You can locate the product key on the Windows Vista CD sleeve or on the Windows Vista CD case.
Note If Windows Vista was preinstalled by an original equipment manufacturer (OEM), the product key appears on a sticker on the case of the computer.

Activating Windows Vista

To activate Windows Vista online, you must have an Internet connection. To activate Windows Vista by telephone, you must use the automated telephone system.

Video: How to activate Windows on your computer

To activate Windows Vista, follow these steps:

1. Click Start, and then click Computer.

2. Click System properties on the toolbar, and then click Click here to activate Windows now in the Windows activation area.
   If you are prompted for an administrator password or for a confirmation, type the password, or click Continue.

3. Select the Windows Vista activation method that you want, and then follow the instructions.

Note If you select the automatic activation method when you first set up your computer, the automatic activation process tries to activate your copy of Windows Vista three days after you first log on.

Verifying that Windows Vista is activated

To verify that your copy of Windows Vista is activated, follow these steps:

1. Click Start, and then click Computer.

2. Click System properties on the toolbar, and view the Windows Vista activation status in the Windows activation area at the bottom of the System properties box.

Note It may take several seconds for Windows Vista to retrieve your computer activation status.

If you cannot activate Windows Vista over the Internet

If you are re-installing Windows or reactivating Windows, the activation process may not be completed successfully when you try to activate Windows Vista over the Internet by using the Windows Activation Wizard. If this occurs, you should activate Windows over the telephone.
To activate Windows Vista over the telephone, follow these steps:

1. Click Start, and then click Computer.

2. Click System properties on the toolbar, and then click Click here to activate Windows now in the Windows activation area.
   If you are prompted for an administrator password or for a confirmation, type the password, or click Continue.

3. The Windows Activation Wizard starts.

4. Click Use the automated telephone system in the Windows Activation Wizard.

Download Microsoft Office Activation Wizard 2013

If Windows Vista requests activation unexpectedly

Download Microsoft Office Activation Wizard

On rare occasions, you may be prompted to activate Windows Vista on a computer that did not previously require Windows Vista activation or was already activated successfully. For example, this may occur on a computer where Windows Vista was preinstalled by an OEM or Volume Licensing installation and major hardware changes have occurred, such as upgrading the hard disk and memory at the same time.
If you are prompted to reactivate Windows Vista, you can do so by using the Windows Activation Wizard: Download corel draw 9 full version.

Get Rid Of Microsoft Office Activation Wizard 2010

1. Click Start, and then click Computer.

2. Click System properties on the toolbar, and then click Click here to activate Windows now in the Windows activation area.
   If you are prompted for an administrator password or for a confirmation, type the password, or click Continue.

3. Select the Windows Vista activation method that you want, and then follow the instructions.

To prevent this problem in the future, you should obtain the latest service pack for your installed version of Windows Vista, either through automatic updates or direct download.
To update Windows Vista and prevent this Activation problem from reoccurring:

Download Microsoft Office Activation Wizard

1. Click Start, click All Programs, and then click Windows Update.

2. Click Check for updates.

3. As soon as Windows Vista has found the updates, click the Install updates button.